Hitachi Power Tools

Hitachi: Inspire the Next

EC2510E 8-Gallon Gas Powered Wheeled Air Compressor

  • Powered by a professional grade Honda GX engine
  • Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover
  • Baseplate integrated control panel protects the gauge, regulator and plumbing while centralizing the controls for simple operation
  • Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply
  • Pneumatic throttle control, that uses air instead of a cable to adjust the throttle, eliminates the common failure of cable throttles due to crimping and breaking
  • Full-size 3/8" locking regulator comes pre-installed
  • Ball valve tank drains makes required tank draining comfortable and convenient
  • Download the EC2510E Tool Card
  • Note- the power rating of the engine is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Includes:

  • Synthetic Oil (SAE5W50) 8 oz. (19210B)
  • Breather Pipe Plug (885483)
  • Wheel (885423)
  • Pressure Gauge (885446)
  • Drive Belt (885444)
  • Filter (881553)
Width 18.1"
Power Output 5.5 Net HP @ 3,600 RPM 
Tank Capacity  8-Gallon 
Displacement  196cc 
Motor RPM  3,200  
CFM @ 90 PSI 9.3
PSI Range 116-145
Control Panel Baseplate
Regulator Size 3/8"
Oil Level Sight Glass Oversized
Oil Level Indicator Sight Glass
Crankcase Breather Metal
Engine Throttle Control Pneumatic
Actual Weight 144 lbs
Length 42.1"
Height 24.4"

Warranty Information

EC2510E

Find a Retailer







Related Tools

Related Image

EC25E 8-Gallon Gas Powered Wheeled Air Compressor
Hitachi adds a twist to its line of air compressors with its gas powered air compressor, which boasts a Honda engine and can deliver 9 cubic feet per minute of air at 100 pounds per square inch.

Related Image

NR83A2 3-1/4" Plastic Collated Framing Nailer
The NR83A2 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NV50A1 2" Coil Utility Nailer
The NV50A1 Wire Collated Utility Nailer is used for the production of wooden boxes, light pallets, wooden furniture, wooden sashes, packing and crate operations in manufacturing plants and construction work such as prefabricated frames.