Hitachi Power Tools

Hitachi: Inspire the Next

DH38YE 1-1/2 Inch Spline Shank Rotary Hammer, 2-Mode

  • 5.2 ft-lbs of impact energy delivering high-speed drilling and forcible chipping
  • 8 Amp motor delivers maximum productivity
  • 2 modes of operation hammer & drill and  hammer only for flexibility within a range of applications
  • Sealed grease system ensures minimal maintenance
  • Dust proof cover protects tool for extended maintenance free operation
  • Auto-stop carbon brush system to prolong tool life and protect armature
  • Removable side handle with depth gauge improves control and ensures accurate drilling depth
  • Download the DH38YE Tool Card

Includes:

  • Depth Gauge (917786)
  • Side Handle (981870)
  • Injection Molded Carrying Case (317657)
  • Dust Cover (985373)
  • 5mm Hex Wrench (944459)
  • 1 oz. Tube Hammer Grease (981840)
Shank Spline
Chuck Size 1-1/2"
No-Load Speed 380 rpm
Impact Rate 2800 bpm
Impact Energy 5.2 ft-lbs
Amps 8
Capacity: Drill Bit 1-1/2"
Capacity: Core Bit 4-1/8"
Modes of Operation Hammer/Hammer & Drill
Switch Electronic
Handle Type D
Power Input 870W
Tool Length 17-15/16"
Tool Weight 17.0 lbs

Warranty Information

DH38YE

Find a Retailer







Related Tools

Related Image

H45FRV 3/4 Inch Round/Hex Demolition Hammer, EVS
The H45FRV Demolition Hammer improves on the performance, durability and operability of its predecessors by producing 40% more impact energy (now the highest in its class), 45% less vibration and a 30% reduction in tool exertion.

Related Image

DH40MR 1-9/16? SDS Max Shank Rotary Hammer, 2-Mode
The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

Related Image

DH40FR 1-9/16 Inch Spline Shank Rotary Hammer, 2-Mode, EVS
The DH40FR Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40FR takes rotary hammers to a new level.

Related Image

G12SA2 4-1/2? Disc Grinder
The G12SA2 4 1/2" 7.7 AMP Disc Grinder deburs diecast products; finishes iron, bronze, aluminum, and diecast products; finishes welds and torch-cut surfaces; cuts soft steel materials; and grooves and cuts concrete and other stone materials.

Related Image

CR13V 10 Amp Reciprocating Saw
The CR13V's powerful 10 Amp motor cuts through metal, wood and plastics with ease.