Hitachi Power Tools

Hitachi: Inspire the Next

DH50SBK 2 Inch Spline Shank Rotary Hammer, 2-Mode

  • 9.6 ft-lbs of impact energy, delivering high-speed drilling and forcible chipping
  • 10.4 Amp motor, increases productivity and power
  • 2-modes of operation, hammer & drill and  hammer only for flexibility within a range of applications
  • Exclusive "mouth less idle" hammering mechanism, requires less pressing force and reduces wear and tear on tool
  • Sealed grease system, ensures minimal maintenance
  • Auto-stop carbon brush system, replaceable to prolong tool life and protect armature
  • Soft, non-slip Elastomer grip D-handle, absorbs vibration and improves comfort and handling
  • Removable D-shaped side handle, minimizes fatigue
  • Bar type side handle, improves control
  • Download the DH50SBK Tool Card

Includes:

  • Steel Case (C102405H)
  • D-Shaped Side Handle (986959)
  • Bar-Type Side Handle (956259)
  • Dust Cover (993245)
  • 6mm Hex Wrench (872422)
  • 1 oz. Tube Hammer Grease (981840)

Optional

  • Service Kit (993255)
Shank Spline
Chuck Size 2"
No-Load Speed 300 rpm
Impact Rate 2450 bpm
Impact Energy 9.6 ft-lbs
Amps 10.4
Capacity: Drill Bit 2"
Capacity: Core Bit 5"
Modes of Operation Hammer/Hammer & Drill
Switch Electronic
Handle Type D
Power Input 1140W
Tool Length 19-3/4"
Tool Weight 19.2 lbs

Warranty Information

DH50SBK

Find a Retailer







Related Tools

Related Image

H45FRV 3/4 Inch Round/Hex Demolition Hammer, EVS
The H45FRV Demolition Hammer improves on the performance, durability and operability of its predecessors by producing 40% more impact energy (now the highest in its class), 45% less vibration and a 30% reduction in tool exertion.

Related Image

DH50SBK 2 Inch Spline Shank Rotary Hammer, 2-Mode
The DH50SBK Spline Shank 2" Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work.

 

Related Image

DH40FR 1-9/16 Inch Spline Shank Rotary Hammer, 2-Mode, EVS
The DH40FR Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40FR takes rotary hammers to a new level.

Related Image

DH38YE 1-1/2 Inch Spline Shank Rotary Hammer, 2-Mode
The DH38YE Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work.

Related Image

G12SR2 4-1/2? Disc Grinder
The G12SR2 4 1/2" Disc Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble.

Related Image

CR13V 10 Amp Reciprocating Saw
The CR13V's powerful 10 Amp motor cuts through metal, wood and plastics with ease.