Hitachi Power Tools

Hitachi: Inspire the Next

DH45MR 1-3/4 Inch SDS Max Rotary Hammer, 2-Mode, EVS

  • Fastest drilling and chiseling speeds on the market
  • Best-in-Class impact energy of 11.4 ft-lbs for unmatched performance
  • 11.6 amp, 1200 watt motor increases productivity
  • IDI (Internal Double Insulation) Technology includes a rigid aluminum housing to protect against jobsite abuse
  • Constant speed control minimizes changes in speed and hammering as load varies, creating more efficient performance
  • Electronic variable speed control allows user to select tool speed appropriate for the material with a full-load RPM range of 120-240 and impact rates of 1200-2500 BPM
  • Auto-stop carbon brushes prolong service life of tool
  • Needle-pin slip clutch provides higher slip torque accuracy to protect gears and increase user safety
  • Variable lock mechanism provides optimal working angles with easy bit changes
  • Two modes of operation- hammer only & hammer-drill- give the user flexibility throughout a range of applications
  • Elastomer coated handles have a soft grip for more comfortable, non-slip operation
  • Removeable side handle is securely fastened with a rigid steel bracket and can be adjusted 360 degrees for control and maneuverability
  • Depth gauge insures accurate drilling depth
  • Metal seatings for motor bearings prevent motor core deviation and grease leakage that shortens the life of the tool
  • Download the DH45MR Tool Card

Includes

  • Depth Gauge (971786)
  • Side Handle (313078)
  • Hex Bar Wrenches- (944458, 944459)
  • Injection Molded Carrying Case (324820)
  • 1 oz. Tube Hammer Grease (981840)
Shank SDS Max
Chuck Size 1-3/4"
No-Load Speed 120-240 RPM
Impact Rate 1200-2500 BPM
Impact Energy 11.4 ft-lbs
Amps 11.6
Capacity: Drill Bit 1-3/4"
Capacity: Core Bit 4-29/32"
Modes of Operation Hammer/Hammer-Drill
Switch EVS
Handle Type D
Power Input 1200W
Tool Length 19.7"
Tool Weight 17.6 lbs

Warranty Information

DH45MR

Find a Retailer







Related Tools

Related Image

G23MR 9" 15-Amp Angle Grinder, AC/DC
The G23MR 9" Angle Grinder is equipped with Hitachi's Internal Double Insulation (IDI) technology that significantly strengthens the body of the tool.  The G23MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

Related Image

VB16Y Rebar Cutter/Bender
Hitachi's VB16Y Portable Rebar Cutter and Bender offers jobsite simplicity, precision, and portability promising to dramatically reduce the cost of on-site rebar installation. Unlike other machines on the market, the VB16Y can both bend and cut rebar and is easily transportable.

Related Image

H60MRV SDS Max Demolition Hammer, EVS
The H60MRV Demolition Hammer has been engineered for high chipping and demolishing performance with low vibration and noise levels. Hitachi's exclusive IDI (Internal Double Insulation) Technology, internal shock absorbtion mechanisms and original vibration reducing handle provide durability, extend tool life and limit user fatigue.