Hitachi Power Tools

Hitachi: Inspire the Next

H60MRV SDS Max Demolition Hammer, EVS

  • Powerful motor 12.5 Amps and a maximum 19.2 ft/lbs of impact energy to force its way through materials quickly and easily
  • Low operating noise (only 91.5 dB with full-load) making it one of the quietest demolition hammers on the market
  • Exclusive IDI (Internal Double Insulation) Technology provides double insulation for significant durability and extended tool life
  • Vibration absorbing handle is uniquely designed to flex and absorb vibration and reduce user fatigue
  • Constant speed control with a variable speed control dial allows the user to set the impact rate according to the operation and material
  • Simple variable lock mechanism is utilized to position attachment bits into one of twelve angle adjustments to accomodate different applications
  • Fully adjustable side D-handle rotates 360? and swivels front to back depending on need for the application
  • Download the H60MRV Tool Card

Includes:

  • Case (324049)
  • 6mm Hex Bar Wrench (872422)
  • Bull Point (724963)
  • Side Handle (317103)
Shank SDS Max
Amps 12.5
Impact Energy 19.2 ft/lbs
Impacts/Min (Full Load) 930 - 1,650 bpm
Side Handle 360 Degree
Chisel Rotation VLM, 12 Angles
Power Input 1,350 Watts
Tool Length 22-43/64"
Tool Weight 23.1 lbs

Warranty Information

H60MRV

Find a Retailer







Related Tools

Related Image

H65 1-1/8? Hex Demolition Hammer
The H65 1 1/8" Hex Demolition Hammer crushes concrete, grooves and channel digs in concrete, asphalt and gravel roads. This model is also capable of cutting asphalt for road construction and repair. This model is not available in Canada.

Related Image

DH40MR 1-9/16? SDS Max Shank Rotary Hammer, 2-Mode
The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

Related Image

CC12Y 12" Portable Cut-Off Saw, AC/DC
The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

Related Image

G12SE2 4-1/2" 9.5-Amp Angle Grinder, AC/DC
The G12SE2 4-1/2" Angle Grinder is compact and powerful. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

Related Image

G18MR 7" 15-Amp Angle Grinder, AC/DC
The G18MR 7" Angle Grinder is equipped with Hitachi's IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G18MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.