Hitachi Power Tools

Hitachi: Inspire the Next

H65 1-1/8? Hex Demolition Hammer

  • 20.7ft/lbs of impact energy, delivers forcible chipping
  • 11.4 Amp motor, increases productivity on tough demolition applications
  • Automatic oiling system with unique ?air pressure oil control?, enables extended use without oiling
  • Idle hammering prevention, increases tool life and minimizes maintenance
  • Adjustable side D-handle, rotates for better control

Includes

  • Side Handle
  • Steel carrying case
  • Wrench
  • Hex Wrench
  • Bull Point
  • Oil Feeder
Amps11.4
Impact Rate1400bpm
Impact Energy20.7ft/lbs
Chisel RotationN/A
Power Input1240W
Tool Length31"
Tool Weight39.7lbs

Warranty Information

H65

Find a Retailer







Related Tools

Related Image

H85 1-1/8? Hex Demolition Hammer, Oil Bath
The H85 1 1/8" Hex Demolition Hammer crushes and grooves concrete, cuts asphalt, digs gravel roads for applications such as air conditioning, piping and wiring, sanitary facility construction, water and supply drainage, port facilities, road construction and various other civil engineering construction and repair work.

Related Image

DH40MR 1-9/16? SDS Max Shank Rotary Hammer, 2-Mode
The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

Related Image

G18MR 7" 15-Amp Angle Grinder, AC/DC
The G18MR 7" Angle Grinder is equipped with Hitachi's IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G18MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

Related Image

G23MR 9" 15-Amp Angle Grinder, AC/DC
The G23MR 9" Angle Grinder is equipped with Hitachi's Internal Double Insulation (IDI) technology that significantly strengthens the body of the tool.  The G23MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

Related Image

VB16Y Rebar Cutter/Bender
Hitachi's VB16Y Portable Rebar Cutter and Bender offers jobsite simplicity, precision, and portability promising to dramatically reduce the cost of on-site rebar installation. Unlike other machines on the market, the VB16Y can both bend and cut rebar and is easily transportable.