Hitachi Power Tools

Hitachi: Inspire the Next

G23MR 9" 15-Amp Angle Grinder, AC/DC

  • 15 Amp motor produces forcible output power (3,500W) for the toughest grinding jobs
  • Class leading overload durability
  • Tool-less wheel guard can be adjusted to desired angle
  • Sealed armature coil, reduces wear caused by dust and debris for longer tool life
  • Dust-resistant labyrinth construction prolongs armature, switch and bearing life
  • Ball bearings seated in iron retainer for greater durability
  • Three position adjustable side handle, reduces vibration
  • Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool
  • 11.9lbs, lightweight design facilitates maneuverability
  • Trigger lock-on for comfortable continuous operation 
  • Available without lock-on switch- G23MRP9
  • Download the G23MR Tool Card

Includes:

  • Side Handle (322411)
  • Spanner Wrench (937913Z)
  • Wheel Guard (324267)
Amps 15
Power Output 980W
Max. Power Output 3,500W
No-Load Speed 6,000rpm
Wheel Diameter 9"         
Type of Motor AC Single Phase Commutator Motor
Enclosure IDI-Internal Double Insulation
Type of Switch Trigger
Trigger Lock On Yes
Spindle Thread 5/8" x 11
Spindle Lock Yes
Length 19-3/8"
Weight 11.9lbs

Warranty Information

G23MR

Find a Retailer







Related Tools

Related Image

DH40MR 1-9/16? SDS Max Shank Rotary Hammer, 2-Mode
The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

Related Image

CC12Y 12" Portable Cut-Off Saw, AC/DC
The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

Related Image

KC18DMR (discontinued) 18V NiMH 4-Tool Combo Kit
The new KC18DMR is an 18-Volt, 4-piece, pro-grade combo kit. This kit includes the DV18DMR 18V hammer drill that offers an incredible 550 in/lbs of torque - Best in Class, the CR18DMR 18V reciprocating saw, the C18DMR 18V 6-1/2  inch circular saw, and a powerful 18V lantern. Also included are two high-capacity 3.0Ah NiMH batteries, a rapid charger, and a balllistic nylon tool bag.

Related Image

DH24PF3 15/16 Inch SDS Plus Rotary Hammer, 3-Mode, VSR (D-Handle)
The DH24PF3 15/16" SDS Plus Rotary Hammer offers the end-user 3-modes of operation. It hammer drills into concrete, brick or stone with ease and offers a best in class drilling speed and impact rate. The DH24PF3 is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.