Hitachi Power Tools

Hitachi: Inspire the Next

VB16Y Rebar Cutter/Bender

  • 8 Amp motor, iintense power (530W) that it uniformly bends up to No.5 (3/8", 1/2", 5/8") Grade 60 rebar at a maximum angle of 180 degrees
  • Variable speed trigger with safety lock provides manual-like precision and control over the bending speed
  • Reference markings on bending plate provide for easy position adjustment
  • Precision angle bends are preset and completed in just seconds (cut: 3.1 seconds, bend: 5.1 seconds) for consistency
  • With the turn of a pre-set dial, bends can be made in a variety of angles
  • Extremely low profile design (18.4"L x 8.5"H x 9.1"W), yet extremely stable
  • 39.7 lbs, portable design facilitates maneuverability and ease of use
  • Download the VB16Y Tool Card


  • Deflection Guard (320914)
  • Cutter Set (1 pair) (319706)
  • D62 Center Roller (319714)
Amps 8
Switch Variable Speed
Cutting Time 2.5 sec
Bending Time 4.3 sec
Capacity 5/8" Grade 60
Tool Weight 39.7 lbs

Warranty Information


Find a Retailer

Related Tools

Related Image

DH40MR 1-9/16? SDS Max Shank Rotary Hammer, 2-Mode
The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

Related Image

CD14F 14" Portable Dry Cut Metal Saw
The CD14F 14" Dry-Cutting Metal Saw cuts round pipe, square pipe and flat mild steel. Applications include installation of piping and plumbing for electricity, gas and water supplies.

Related Image

CC12Y 12" Portable Cut-Off Saw, AC/DC
The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

Related Image

G18MR 7" 15-Amp Angle Grinder, AC/DC
The G18MR 7" Angle Grinder is equipped with Hitachi's IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G18MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

Related Image

H60MRV SDS Max Demolition Hammer, EVS
The H60MRV Demolition Hammer has been engineered for high chipping and demolishing performance with low vibration and noise levels. Hitachi's exclusive IDI (Internal Double Insulation) Technology, internal shock absorbtion mechanisms and original vibration reducing handle provide durability, extend tool life and limit user fatigue.