Hitachi Power Tools

Hitachi: Inspire the Next

NR90AA Framing Nailer, Clipped Head, Paper Strip Collation

  • 8.8lbs, lightweight and well balanced for easy maneuverability
  • Superior power, drives 3-1/2? x .148? nails into the hardest construction lumber
  • Depth of drive adjustment to counter-sink or flush drive nails
  • Hardened aggressive toenail push lever, resists wear for prolonged life
  • Open nose design, for easy extraction of a jammed nail
  • Rubber grip, for added comfort
  • Hardened claw tip, reduces wear and limits slippage when driving at a slanted angle


  • Safety Glasses
  • Hex Bar Wrenches (3)
  • Nose Cap
Fastener TypeClipped Head, Paper Strip Collation
Magazine Angle34 Degrees
Fastener Length Capacity2" - 3-1/2"
Fastener Diameter Range.113 to .148
Magazine Capacity56-80
Magazine LoadingTop
Air Inlet3/8"
Operating Pressure70-120psi
Air Consumption.095 (FT3/Cycle@100psi)
Jam ClearingOpen Nose
Depth SettingTool-Less
ActuationContact Opt. Sequential
L x W x H16-15/16"x4-3/4"x14-1/16"
Weight 8.8lbs

Warranty Information


Find a Retailer

Related Tools

Related Image

NR83AA3 3-1/4" Paper Collated Framing Nailer
The NR83AA3 Clipped Head Framing Nailer is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

EC119 Portable 2.5 hp Peak Electric Air Compressor, Oil Lubricated

This portable compressor features a 4-gallon twin stack tank with control panel. The heavy-duty induction motor and cast iron cylinder pump combine for excellent dependability on the jobsite. Additional features including an onboard air-hose and cord wrap, simplify transportation.

Related Image

C12LC 12" Compound Miter Saw with LCD Display
The C12LC 12" Compound Miter Saw with LCD display takes the guesswork out of miter and bevel readings. It features Hitachi's all new aggressive design and cuts various types of wood, crown molding, plywood, decorative panels, soft fiberboard, hard board and aluminum sashes with ease.

Related Image

EC2510E 8-Gallon Gas Powered Wheeled Air Compressor

The EC2510E combines contractor grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 PSI to a maximum of 145 PSI so it turns on well before tools requirements are compromised.