Hitachi Power Tools

Hitachi: Inspire the Next

NV50AP3 2" Coil Cap Nailer

  • Lightweight at only 5.52 lbs, the NV50AP3 is over 20% lighter than the NV50AP2 for less user fatigue
  • Plastic and metal caps, whether shooting plastic caps or metal caps, this tool meets your needs
  • Drives nail and caps in tandem for better hold
  • Selective actuation, a simple flip of the switch allows for either sequential or bump fire nail- no additional parts or tools required
  • Translucent cap and nail magazine, a simple glance confirms the remaining supply of both fasteners and caps, avoiding inconveniently timed reloads
  • Tool-free depth adjustment, simple adjustment provides flexibility when fastening various materials
  • Drives 350 caps and 350 nails for maximum jobsite efficiency
  • Exceptional Hitachi balance and fully adjustable exhaust make this the ideal tool for Tyvek installation, tar paper and any other sheathing
  • Download the NV50AP3 Tool Card


  • Safety Glasses (875769)
Depth Adjustment Tool-less
Adjustable Exhaust Yes
Fastener Type Nail Full Round Head-Wire Coil
Fastener Type Cap Plastic/Plastic,Steel/Tape
Fastener Diameter Range .083
Magazine Angle 16 Degrees
Magazine Loading Nails/Side, Caps/Side
Air Inlet 3/8"
Actuation Selective (sequential/contact)
Air Consumption .042
Actual Weight 5.52 lbs
Length 14-9/16"
Height 10-19/32"
Width 6"
Operating Pressure 70-120
Nail or Staple Nail
Cap Capacity 350
Nail Capacity 350
Fastener Length 7/8" - 2"
Washer Type Plastic and Steel (Roll)

Warranty Information


Find a Retailer

Related Tools

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NV50A1 2" Coil Utility Nailer
The NV50A1 Wire Collated Utility Nailer is used for the production of wooden boxes, light pallets, wooden furniture, wooden sashes, packing and crate operations in manufacturing plants and construction work such as prefabricated frames.

Related Image

EC119 Portable 2.5 hp Peak Electric Air Compressor, Oil Lubricated

This portable compressor features a 4-gallon twin stack tank with control panel. The heavy-duty induction motor and cast iron cylinder pump combine for excellent dependability on the jobsite. Additional features including an onboard air-hose and cord wrap, simplify transportation.

Related Image

EC2510E 8-Gallon Gas Powered Wheeled Air Compressor

The EC2510E combines contractor grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 PSI to a maximum of 145 PSI so it turns on well before tools requirements are compromised.