Hitachi Power Tools

Hitachi: Inspire the Next

EC189 8-Gallon Electric Wheeled Air Compressor

  • 6.6 cfm at 90 psi for multiple tool operation
  • 8-gallon, large capacity twin tank capable of running multiple nailers
  • Cast iron pump with oil splash lubrication and ball bearing mounted crank shaft for durability
  • Belt drive fly wheel lowers pump rpm for longer life
  • Wheel barrel design for easy maneuverability around a work site
  • Oil lubricated pump improves efficiency and ensures smooth use
  • Download the EC189 Tool Card


  • Synthetic Oil SAE5W50 8oz (19210B)
  • Oil Dipstick (724119)
Drive Belt
Motor 13.2 amp
Power Output 1.5 Run hp
Rpm 730
CFM 6.6cfm @ 90 psi
Start/Stop Control 95/120psi
Tank Capacity 8.0 gal
Pump Speed 730
Weight 172 lbs
Recovery Time 17-sec

Warranty Information


Find a Retailer

Related Tools

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NT65MA2 Angled Finish Nailer, 15-Gauge Angled Finish Nails
The NT65MA2 15-Gauge Angled Finish Nailer is used for installing cabinets, door and window casings, staircases and chair rails. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster, cleaner job completion.

Related Image

NR83A2 3-1/4" Plastic Collated Framing Nailer
The NR83A2 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

NT65M 2-1/2", 16-Gauge Finish Nailer with Air Duster
The NT65M 2-1/2", 16-Gauge Finish Nailer is used for installing molding, chair rails, cabinetry and other fine finish applications.