Hitachi Power Tools

Hitachi: Inspire the Next

EC129 Portable 3.5hp Peak Cart Style Compressor, Oil Lubricated

  • 15 amp induction motor, powerful for heavy-duty applications
  • Rugged cast iron cylinder pump with oversized bearings for dependable worksite performance
  • Cart mounted, 5-gallon twin stack tank, for easy portability
  • Roll cage design and custom control panel, protect pump, motor and gauges from worksite hazards
  • Sturdy detachable handle and large, pneumatic tires ease worksite mobility
  • 6.0 cfm at 40 psi and 4.7 cfm at 90 psi for multiple tool operation
  • 125 psi max working pressure, for efficient air storage
  • Manual reset overload protection, eliminates trips to the breaker
  • Tank drain ball valves, for easy tank maintenance
  • Convenient cord wrap keeps power cord out of harms way

Includes:

  • Synthetic Oil (8 oz) SAE5W50
  • Oil Dipstick
Peak Horse Power3.5
Amps15
RPM3450
Air Delivery6.0 cfm @40 psi, 4.7 cfm @90 psi
Start/Stop Control100 psi on/125 psi off
Max Working Pressure125 psi
Tank Capacity5.0 gallons
LubricationOil
Recovery Time (sec.)14
Weight92lbs

Warranty Information

EC129

Find a Retailer







Related Tools

Related Image

NT65MA2 Angled Finish Nailer, 15-Gauge Angled Finish Nails
The NT65MA2 15-Gauge Angled Finish Nailer is used for installing cabinets, door and window casings, staircases and chair rails. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster, cleaner job completion.

Related Image

NR83A2 3-1/4" Plastic Collated Framing Nailer
The NR83A2 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NT65M 2-1/2", 16-Gauge Finish Nailer with Air Duster
The NT65M 2-1/2", 16-Gauge Finish Nailer is used for installing molding, chair rails, cabinetry and other fine finish applications.