Hitachi Power Tools

Hitachi: Inspire the Next

EC119SA Portable 4-Gallon Twin Stack Air Compressor

  • Powerful 15 Amp induction motor for quiet operation and extended use as compared to universal motor products
  • Contractor preferred 4-gallon twin stack features a large finned head pump and metal cooling fan to keep the pump cool during tough applications
  • Oil lubricated pump utilizes oversized bearings for quiet and dependable service
  • Produces 5.3 cfm @ 40psi and 4 cfm @ 100psi
  • Locking regulator and 105 on/135 off psi means no worries about pressure wander or pressure starved tools on the job
  • Unique roll cage design protects the pump and motor from damage
  • Custom integrated control panel protects the gauge, regulator and plumbing, while centralizing controls for ease of use
  • Convenient features include easy to use drain ball valves, a cord wrap that secures the cord when not in use, a protected pressure switch, shock absorbing feet, manual overload protection, two handed handle for manageability and two factory installed couplers ready for plug and play functionality
  • Lightweight at just 63.7 lbs
  • Download the EC119SA Tool Card

Includes:

  • Industrial Couplers (2)  (191171)
  • Synthetic Oil- SAE5W50 (8 oz.)  (19210B) 
  • Oil Dipstick (881469)
Horse Power 1.6 Run HP/2.5 Peak HP
Amps 15
RPM 3,450
CFM 4.4 @ 90 psi
Start/Stop Control 105/135 psi
Max Working Pressure 135 psi
Tank Capacity 4.0 gallons
Lubrication Oil
Recovery Time 14 sec
Weight 63.7 lbs

Warranty Information

EC119SA

Find a Retailer







Related Tools

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NV65AH 2-1/2" Coil Siding Nailer
The NV65AH Siding Nailer "Another very light nailer, the NV65AH is a well-engineered tool. It's packed with great features like a tool-less depth adjustment and a 360-degree exhaust diverter. It will feed either wire- or plastic-collated nails. It also ships with a non-marring tip. Our experience with Hitachi nailers leads us to believe that this is one of the most dependable tools we tested." (Davis, Tool Test: Siding Nailers: Side Winders; Tools of the Trade Nov./Dec. 2000:42-51)

Related Image

NR83A2(S) 3-1/4" Plastic Collated Framing Nailer (without Depth Adjustment)
The NR83A2(S) Full Round Head Framing Nailer (without depth adjustment) is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

NR90AD 3-1/2" Clipped Head Framing Nailer
The NR90AD 3-1/2" clipped head framing nailer features Hitachi's new agressive design and is the lightest nailer in its class. It is used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction.

Related Image

NR90AE 3-1/2" Round Head Framing Nailer
The NR90AE 3-1/2" Round Head Framing Nailer is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.