Hitachi Power Tools

Hitachi: Inspire the Next

New Metalworking

G12SN
G12SN
G12SN 4-1/2" 7.4-Amp Angle Grinder

The G12SN  4-1/2" 7.4-amp angle grinder offers rugged durability in a small package. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12VA
G12VA
G12VA 4-1/2" 13-Amp Variable Speed Angle Grinder

The G12VA 4-1/2" 13-Amp angle grinder features over 1,500 Watts of power. This grinder utilizes zero voltage restart protection that prevents it from restarting if power is temporarily lost while the tool is in operation. Electronic overload protection shuts the motor off in case of a bind or overload. It also features a variable speed switch to set the RPMs to suit the application, as well as an anti-vibration handle, kick-back reduction, a tool-less wheel guard that can be removed if the job calls for it, and a low-profile, compact design which also allows it to fit into tight spaces. Recommended uses include surface finishing, rust and paint removal, light grinding, concrete finishing, wire cup and wire wheel applications.

G13SN
G13SN
G13SN 5" 7.4-Amp Angle Grinder

The G13SN  5" 7.4-amp angle grinder offers rugged durability in a small package. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G13VA
G13VA
G13VA 5" 13-Amp Variable Speed Angle Grinder

The G13VA 5" 13-Amp Variable Speed Angle Grinder combines the power and performance with safety and convenience. With outstanding power at over 1500 watt input, the G13VA is in a class of its own. It utilizes zero voltage restart protection that prevents it from restarting if power is temporarily lost while the tool is in operation. Electronic overload protection shuts the motor off in case of a bind or overload. It also features a variable speed switch to set the RPMs to suit the application, as well as an anti-vibration side handle, kick- back reduction, a tool-less wheel guard that can be removed if the job calls for it, and a low-profile, compact design, which also allows it to fit into tight spaces. Recommended for surface finishing, rust and paint removal, light grinding, concrete finishing, wire cup and wire wheel applications.

GP3V
GP3V
GP3V 1" 4.7-Amp Variable Speed Die Grinder

The GP3V 1" 4.7-Amp variable speed die grinder is used for finishing dies for press work, die casting, molding, thread cutting dies, tool and other small parts as well as for internal grinding of tools and machine parts. The variable speed control adjusts the RPM from 7,000 to 29,000 depending on the application. Electronic soft start provides a smooth start up and the small grip perimeter provides maximum control, while the locking slide switch prevents fatigue.

GP5V
GP5V
GP5V 2" 4.7-Amp Variable Speed Die Grinder

The GP5V 2" 4.7-Amp variable speed die grinder is used for finishing dies for press work, die casting, molding, thread cutting dies, tool and other small parts as well as for internal grinding of tools and machine parts. The variable speed control adjusts the RPM from 2,000 to 8,300 depending on the application. Electronic soft start provides a smooth start up and the small grip perimeter provides maximum control, while the locking slide switch prevents fatigue.