Hitachi Power Tools

Hitachi: Inspire the Next

DH40FR 1-9/16 Inch Spline Shank Rotary Hammer, 2-Mode, EVS

  • 7.4 ft-lbs of impact energy delivering high-speed drilling and forcible chipping with low vibration and noise level
  • 9.2 Amp motor increases productivity
  • 2 modes of operation, hammer & drill and  hammer only for flexibility within a range of applications
  • Built-in electronic control circuit keeps speed constant even as load varies
  • Needle-pin slip clutch for higher slip torque accuracy and safety
  • Soft, non-slip elastomer grip absorbs vibration and improves comfort and handling
  • Revolutionary IDI (Internal Double Insulation) Technology incorporated into the housing of the tool greatly improves reliability and extends the tool life
  • Removable side handle with depth gauge improves control and ensures accurate drilling depth
  • Download the DH40FR Tool Card

Includes:

  • Depth Gauge (971786)
  • Side Handle (313078)
  • Injection Molded Carrying Case (322152)
  • Dust Cover (993245)
  • Hex Wrenches (944458, 943277, 944459)
  • 1 oz. Tube Hammer Grease (981840)
Tool Length 16-15/16"
Tool Weight 14.3 lbs
IDI Technology Yes
Shank Spline
Chuck Size 1-9/16"
No-Load Speed 240-480 rpm
Impact Rate 1,320-2,650 bpm
Impact Energy 7.4 ft-lbs
Amps 9.2
Capacity: Drill Bit 1-9/16"
Capacity: Core Bit 4-1/8"
Modes of Operation Hammer/Hammer & Drill
Switch EVS
Handle Type D
Power Input 950W

Warranty Information

DH40FR

Find a Retailer







Related Tools

Related Image

H45FRV 3/4 Inch Round/Hex Demolition Hammer, EVS
The H45FRV Demolition Hammer improves on the performance, durability and operability of its predecessors by producing 40% more impact energy (now the highest in its class), 45% less vibration and a 30% reduction in tool exertion.

Related Image

DH50SBK 2 Inch Spline Shank Rotary Hammer, 2-Mode
The DH50SBK Spline Shank 2" Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work.

 

Related Image

DH38YE 1-1/2 Inch Spline Shank Rotary Hammer, 2-Mode
The DH38YE Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work.

Related Image

G13SC2 5" 11-Amp Angle Grinder
The G13SC2 5" Angle Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

Related Image

CR13VA Reciprocating Saw, Electronic Variable Speed
The CR13VA?s powerful 11Amp motor tackles any application with power to spare.