Hitachi Power Tools

Hitachi: Inspire the Next

H55SC 3/4 Inch Hex Demolition Hammer

  • 11.8ft/lbs of impact energy delivers forcible chipping with low vibration and noise level
  • 10.4 Amp motor increases productivity
  • Exclusive "mouth-less idle" hammering mechanism requires less pressing force and reduces wear and tear on tool
  • Dust resistant cover protects tool for extended maintenance free operation
  • Removable side D-handle adjusts for better control and reduces vibration  
  • Variable lock system makes bit replacement simple and offers multiple tool angles for chiseling
  • Download the H55SC Tool Card

Includes:

  • Side Handle (986959)
  • 6mm Hex Wrench (872422)
  • 12" Bull Point (985430)
  • Dust Cover (985468)
Shank 3/4" Hex
Amps 10.4
Impact Rate 1,450 bpm
Impact Energy 11.8 ft/lbs
Power Input 1140W
Tool Length 22-1/4"
Tool Weight 24.3 lbs

Warranty Information

H55SC

Find a Retailer







Related Tools

Related Image

CC12Y 12" Portable Cut-Off Saw, AC/DC
The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

Related Image

VB16Y Rebar Cutter/Bender
Hitachi's VB16Y Portable Rebar Cutter and Bender offers jobsite simplicity, precision, and portability promising to dramatically reduce the cost of on-site rebar installation. Unlike other machines on the market, the VB16Y can both bend and cut rebar and is easily transportable.

Related Image

H60MRV SDS Max Demolition Hammer, EVS
The H60MRV Demolition Hammer has been engineered for high chipping and demolishing performance with low vibration and noise levels. Hitachi's exclusive IDI (Internal Double Insulation) Technology, internal shock absorbtion mechanisms and original vibration reducing handle provide durability, extend tool life and limit user fatigue.

Related Image

H65SD2 1-1/8 Inch Hex 40 lbs Demolition Hammer
The H65SD2 Demolition Hammer is ideal for demolishing concrete, groove and channel digging in concrete, asphalt and gravel, tamping/compacting asphalt and gravel roads, cutting asphalt, construction work, piping and wiring work and water supply and drain work.

Related Image

G23MRP9 9" 15-Amp Angle Grinder, AC/DC (Non Locking Switch)
The G23MRP9  9” Angle Grinder with non-locking switch is equipped with Hitachi’s IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G23MRP9 deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.