Hitachi Power Tools

Hitachi: Inspire the Next

NV45AE 1-3/4" Coil Roofing Nailer (Side Load)

  • Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions
  • Consumes 30% less air allowing for more productivity time per compressor cycle
  • 30% faster bump firing speed for a rapid finish
  • 30% less recoil for optimized kick back to propel nailer across the course
  • Constructed with all aluminum components for durability
  • Improved push lever design has integrated holes to expel excess tar and grime build-up
  • Two-piece push lever lower segment can be easily removed for maintenance or replacement
  • Three-point carbide insert on nose piece increases life and reduces wear
  • Improved rubber composite guard wraps the side-edge of the magazine and critical points on the tool body to endure harsh working conditions
  • Non-slip texture keeps tool from sliding down a pitched roof
  • Side loading magazine allows for quick and easy nail replenishment (bottom load option available, NV45AE(S)
  • Last nail magnet holder holds the final nail in the coil in place to prevent loss or misfired nails
  • Tool-less depth of drive dial can be adjusted on the spot to meet the application for ultimate convenience
  • Elastomer composite material covers the grip for a secure hold
  • Ergonomic design and exceptional tool balance not only reduces user fatigue and repetitve injuries, but also provides more control during use
  • Accepts 7/8" - 1-3/4" fasteners with wire coil collation
  • 5.5 lbs, lightweight for easy maneuverability
  • Download the NV45AE Tool Card

Includes:

  • Safety Glasses (875769)
  • 4mm & 5mm Hex Bar Wrenches (944458, 944459)

Optional:

  • Sequential Trip Mechanism (878226)
Fastener Type Coil, Wire Collation
Magazine Angle 16 Degrees
Fastener Length Capacity 7/8" - 1-3/4"
Fastener Diameter Range .120
Magazine Capacity 120 Nails
Magazine Loading Side
Operating Pressure 70-120 psi
Actuation Selective ( Seq./Bump)
LxH 9-27/32" - 10-3/8"
Weight 5.5 lbs
Air Consumption 1.0 I/Shot
Motor System Cylinder Valve
Feeding Mechanism Air
Carbide # 3 Points
Recoil 11/32"
Noise Level 85 dB
Vibration Level 3.94 m/s2
Final Nail Stopper Yes
Dry Fire Lockout No

Warranty Information

NV45AE

Find a Retailer







Related Tools

Related Image

EC25E 8-Gallon Gas Powered Wheeled Air Compressor
Hitachi adds a twist to its line of air compressors with its gas powered air compressor, which boasts a Honda engine and can deliver 9 cubic feet per minute of air at 100 pounds per square inch.

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NV45AB2(S) 1-3/4" Coil Roofing Nailer (Bottom Load)
"The NV45AB2(S)'s magazine, depth of drive and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/Aug 2005. The 1-3/4 roofing nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2(S) has a bottom load magazine.

Related Image

EC189 8-Gallon Electric Wheeled Air Compressor
The EC189 features an 8 gallon wheelbarrow tank for multiple nail operation and a Cast Iron pump for long life and dependable air production. The low RPM, oil lubricated pump and ball bearing mounted crank shaft ensure dependable performance at the worksite.

Related Image

EC2510E 8-Gallon Gas Powered Wheeled Air Compressor

The EC2510E combines contractor grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 PSI to a maximum of 145 PSI so it turns on well before tools requirements are compromised.

Related Image

EC119SA Portable 4-Gallon Twin Stack Air Compressor
This portable compressor features a 15 amp induction motor for quiet operation  and extended life. The EC119SA ships ready to work with two factory installed couplers and a bottle of synthetic oil. For the contractor seeking plug and play convenience and jobsite durability combined, this hand carry air compressor is ideal.